ScopeOut® SUV Mounting Instructions

Mounting Instructions

- Store unit at room temperature for 24 hours or more before installing.
- If above 70 degrees F, do not install in direct sunlight.
- If below 60 degrees F, carefully heat area where you will be attaching the ScopeOut with a heat lamp or hair dryer till warm to the touch.
1. Assemble by pushing together the ends [a]and tightly securing with screws
2. Mount so that mirrors are close to the upper inside of rear window.
3. Clean optimal mounting surface with rubbing alcohol.*
4. Peel off protective paper from adhesive [b] and press against mounting surface for 60 seconds
5. Repeat these steps for the opposite side.
6. Once mounted, adjust angle of mirror for best viewing angle.


topline
Copyright © 2008 Sense Technologies Inc. All Rights Reserved.
topline
Please send all comments concerning this site to webmaster.